GE Profile CustomStyle PSI23MGT Dimensions And Installation Information page 2

PSI23MGT
GE Profile CustomStyle
Rough-In Dimensions and Installation Information (in inches)
Installation Tips to Maximize the Built-In Look
• All wall/floor molding should be removed prior to installation.
• Water recess on rear wall recommended to prevent water
line damage. 48" minimum length, 1/4" diameter water
line tubing recommended.
• When possible, recess both copper water line and electrical
outlet. (See local codes)
• Front and rear leveling legs are adjustable for the built-in look.
(See owner's manual)
• If optional collar trim kit is to be used or anticipated, see collar
trim installation for different rough-in dimensions
**The rough-in dimensions of 70-1/4"/72-1/4" are minimum and
measured from the finished floor to top of opening (or the
underside of the overhead cabinets). For Models with Trim Kit:
If frameless style cabinets are planned for above the refrigerator,
you may need to consider adding a maximum of 1/4" (70-1/2")
to height of opening for 23 cu. ft. models and 1/8" (72-3/8") for
25 cu. ft. models to allow for additional clearance between the
cabinet doors and the top of refrigerator trim when the cabinet
doors are in open position.
For answers to your Monogram, GE Profile
®
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center
®
800.626.2000.
22.6 Cu. Ft. Side-By-Side Refrigerator with Dispenser
™
or
™
service,
Electrical
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
24"
Cabinet
Water
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
24"
Cabinet
FOR 21 CUBIC FOOT MODELS
Water 8' Ceiling
12"
Soffit
24"
25"
Cabinet
Counter
Top
70-1/4"*
23 cu. ft. models
72-1/4"*
25 cu. ft. models
FOR 24 CUBIC FOOT MODELS
*The rough-in dimensions of 70-1/4"/72-1/4" are minimum and measured from
Electrical
the finished floor to top of opening (or the underside of the overhead cabinets).
For Models with Trim Kit: If frameless style cabinets are planned for above the
refrigerator, you may need to consider adding a maximum of 1/4" (70-1/2") to
height of opening for 23 cu. ft. models and 1/8" (72-3/8") for 25 cu. ft. models
to allow additional clearance between cabinet doors and top of refrigerator trim
when cabinet doors are in open position.
24"
25"
Cabinet
Counter
Top
Specification Revised 10/06
Collar Trim In. w/ceiling
Fig 2A eps
Electrical Water
3/4" Airspace
(1/2" Gap + 1/4"
13" to 14"
Wall Plates)
Cabinet
25"
Counter
Top
Trim
24-1/2"
36-1/8"
Water Electrical
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
25"
Counter
Top
Listed by
Underwriters
Laboratories
Trim
210237