Advertisement
Disassembly and Reassembly
1-3-5 Holder FPC Removal
1. Release the Holder FPC tab holding the Cylinder Base @ in the direction of arrow. (Refer to detail drawing)
2. Disconnect the Holder FPC ! from the Cylinder Base @.
Note : When disconnecting the FPC Holder ! from the Cylinder Base @ :
Take care not to disconnect the FPC cable from the FPC Holder (The FPC cable is very short).
1
HOLDER FPC
2
CYLINDER BASE
CYLINDER BASE
HOLDER FPC
<DETAIL : BOTTOM VIEW>
Fig. 1-15 Head Brush and Holder FPC Removal
1-14
Samsung Electronics
Advertisement
