GE Profile PGCS1NFZSS Owner's Manual And Installation Instructions page 41

(100% safety factors built in for unmetered usage)
Parameter USEPA
MCL
Parameter USEPA
MCL
* Tested using a flow rate of 0.50 gpm; pressure of 60 psig; pH of 7.5 ± 0.5; temp. of 68° ± 5°F (20° ± 3°C)
** Measurement in Particles/ml. Particles used were 0.5-1 microns
*** NTU=Nephelometric Turbidity units
Standard No. 42: Aesthetic Effects
Standard No. 42: Aesthetic Effects
Influent
Challenge Concentration
Influent
Challenge Concentration
Standard No. 53: Health Effects
Influent Effluent
Average Average
Standard No. 53: Health Effects
Influent Effluent
Average Average
% Reduction
Maximum Average Minimum
% Reduction
Maximum Average Minimum
NS F
fi
Min. Required
Reduction
Min. Required
Reduction