Installing The Refrigerator; Refrigerator Location - GE Profile PGCS1NFZSS Owner's Manual And Installation Instructions

INSTALLING THE REFRIGERATOR

REFRIGERATOR LOCATION

CLEARANCES
Standard Depth
Models
Sides
Top
Back
REMOVE TOP CAP
IMPORTANT NOTE: This refrigerator is 34-1/2 deep.
Doors and passageways leading to the installation
location must be at least 36 wide in order to leave
the doors and handles attached to the refrigerator
while transporting it into the installation location. If
passageways are less than 36 , the refrigerator doors
and handles can easily be scratched and damaged.
The top cap and doors can be removed to allow the
refrigerator to be safely moved indoors. Start with
Step A.
If it is not necessary to remove doors, skip Step A.
Leave tape and all packaging on doors until the
refrigerator is in the final location.
SKID REMOVAL: Tilt refrigerator to each side to
remove skid.
NOTE: Use a padded hand truck to move this
refrigerator. Place the refrigerator on the hand truck
with a side against the truck. We strongly recommend
that TWO PEOPLE move and complete this installation.
A
B
C
D
Installation Instructions
Counter Depth
Models
(on some models)
REMOVE TOP CAP (cont.)
REINSTALL DOORS, DRAWERS AND TOP CAP
E
NOTE:
F
G
CONNECTING THE REFRIGERATOR
1
TO THE HOUSE WATER LINE
(icemaker and dispenser models)
Line
NOTES:
18
(on some models)
A
Installing the Water
B