Panasonic EB-X70 Service Manual page 33

Digital cellular phone

Hide thumbs Also See for EB-X70:

Table of Contents

Undo the two screws securing the hinge strap. Retain the screws.

Slide the hinge strap forwards (towards the upper case unit) to remove it, taking care not to damage the board to board

flexi-strip.

Gently twist the upper case assembly to lift the Main PCB away from the lower case back. Separate the PCB from the

upper case assembly by disconnecting the ribbon cable from connector CN200.

6.2.2.

Upper case assembly and display module removal

Using tweezers or a pin, remove the two grey screw caps and discard. Remove the Escutcheon and discard.

Use the trident screwdriver to remove the four screws. Retain the screws for re-assembly.

PMCD030901C8

Service Manual

All manuals and user guides at all-guides.com

Section 6

– 31 –

DISASSEMBLY / REASSEMBLY INSTRUCTIONS

10718-1

CN200

10719-1

10723-1

Issue 1

Revision 0

Table of Contents