Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi light
indicator will be rapidly flashing).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the Wi-Fi light indicator on the LED display for 5
seconds until the Wi-Fi light indicator is flashing.
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the fan heater type from the list of options in the app (Heating & Cooling >
Fans).
7.
Ensure that the device is in pairing mode, with the Wi-Fi light indicator flashing,
and tap "Confirm light is rapidly flashing".
14
Advertisement
Need help?
Do you have a question about the SMARTERHOME KABLFAN3RSA and is the answer not in the manual?