Advertisement
Quick Links
Advertisement
Related Manuals for Kogan SMARTERHOME KABLFAN3RSA
Summary of Contents for Kogan SMARTERHOME KABLFAN3RSA
- Page 1 KOGAN SMARTERHOME™ BLADELESS PURIFIER FAN HEATER KABLFAN3RSA...
-
Page 2: Table Of Contents
Safety & Warnings Overview Operation Connection to SmarterHome™ App Google Home Control Amazon Alexa Control Cleaning & Care Specifications... -
Page 3: Safety & Warnings
• Before use, check that the power cord and the plug are in good condition. If the power cord is damaged, do not use the fan heater. Contact help.Kogan.com for assistance. • If this fan heater is covered or incorrectly placed, it can cause a fire hazard. Keep the fan heater at least 1.5 meters away from any direct heat sources (for example, stoves,... - Page 4 • If the fan heater stops working, turn off the power and unplug the power cord immediately. Contact help.Kogan.com for assistance. • Do not attempt to repair the fan heater yourself. Contact help.Kogan.com for assistance. • Do not use the fan heater if it is facing an electrical outlet or is under a power outlet.
-
Page 5: Overview
OVERVIEW Front view Side view 1 Air duct 7 Air duct 2 Air outlet 8 Top cover 3 LED display 9 Air inlet 4 Top cover 10 Fan heater body 5 Air inlet 11 Power cord 6 Base... -
Page 6: Operation
OPERATION Placement Place the fan heater on a stable level surface. Ensure there at least a 1m clearance with the fan heater from any walls or obstructions. This will make sure there is optimal airflow from the air inlet and outlet. Do not use it in hot and humid areas (for example, bathroom and kitchen). - Page 7 Changing the angle of the air duct The angle of the air duct can be changed manually. Before adjusting the air duct angle, ensure the fan heater is turned off. Hold fan heater body with one hand and set the air duct 15° forward or backward. Notes: •...
- Page 8 Name Icon Description • When in standby, press this button to turn the fan heater on. • Press and hold the button for 1 second to turn the ON/OFF oscillating function on and off. • Press and hold the button for 2 seconds to turn the fan heater off.
- Page 9 Remote control Modes ON/OFF Timer Oscillation UV-C sterilisation Increase temperature Increase fan speed Warm mode Cool mode Decrease temperature Decrease fan speed Note: The remote control should be pointed directly at the signal receiver located near the LED display when used. Name Button Description...
- Page 10 This fan heater features 4 speed modes. These include Normal mode, Sleep mode, Natural mode, and Max mode. • Press this button repeatedly to cycle through and select the desired mode. • Normal mode: Standard operation at the selected fan speed.
- Page 11 • Press this button once to switch the fan heater into Cool mode. • In Cool mode, the LED display lights up as white. Cool mode • Press the ‘Increase fan speed’ and ‘Decrease fan speed’ buttons to adjust the fan speed. •...
- Page 12 Warm mode 1. Press the “Warm mode” button to activate. The LED display will show the current temperature. 2. Press the ‘Increase temperature’ and ‘Decrease temperature’ buttons. The LED display will start flashing and users can adjust the desired temperature between 1-30°C.
-
Page 13: Connection To Smarterhome™ App
Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: Tap to enter registration page. - Page 14 Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi light indicator will be rapidly flashing). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the Wi-Fi light indicator on the LED display for 5 seconds until the Wi-Fi light indicator is flashing.
- Page 15 Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™...
- Page 16 AP mode connection steps Set device in pairing mode To set the device for AP mode pairing, press and hold the Wi-Fi light indicator again for 5 seconds until the Wi-Fi light indicator is flashing slowly. Using AP Mode to add device Once registered, tap “+”...
- Page 17 Select “AP Mode” for the set-up type. Ensure that the device is in pairing mode, with the Wi-Fi light indicator flashing slowly, and tap “Confirm light is slowly flashing”. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
- Page 18 Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection. Note: If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly.
-
Page 19: Google Home Control
From the home page of the Google Home app, select the “+” icon to access the ‘Add and manage’ page. 10. Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’ Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service. - Page 20 12. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices. 13. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 21 15. Tap on any of the devices to view a list of available commands. Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
-
Page 22: Amazon Alexa Control
AMAZON ALEXA CONTROL Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device. Adding “SmarterHome” to the Alexa app 16. From the home page of the Alexa app, select the “ ” icon in the top-right and select Skills &... - Page 23 18. Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa. 19. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 24 SmarterHome™ account. 22. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands. Note: Please note that Alexa can only control the base/core functions of any compatible SmarterHome™...
-
Page 25: Cleaning & Care
CLEANING & CARE WARNING: Unplug the power supply before performing maintenance. Filter replacement 1. Lift out top cover. 2. Lift out the old air filter. 4. Reinstall the top cover. The magnetic lid 3. Insert the new filter into the main body on the top cover should form an easy of the fan heater. - Page 26 Cleaning the fan heater body, air inlet and outlet • Use a soft dry cloth to lightly wipe the surface of the fan heater. • A soft cloth combined with mild diluted detergent may also be used. Wipe dry with another soft cloth.
-
Page 27: Specifications
SPECIFICATIONS Rated voltage/ frequency 220-240V / 50-60Hz Rated power 35W (Fan) / 2000W (Heater) Fan heater dimensions 700 x 55 x 255mm Net weight Approx. 4.8kg Gross weight Approx. 6.6kg... - Page 28 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your fan heater, as well as any additional assistance you may require, head online to help.kogan.com...