Download Print this page

IKEA GRILLSKAR Manual page 8

Hide thumbs Also See for GRILLSKAR:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Cylinders must be stored out of the reach of
children and must not be stored in a building,
garage or any other enclosed area.
TECHNICAL INFORMATION
This side burner is designed for outdoor use only
using propane gas. Please read all accompanying
documentation carefully.
Switzerland (CH)
Gas category: I3+(28-30/37)
Gas type and pressure: Propane/29mbar
Maximum gas consumption: 218gm/h
Total heat input: 3kW
Main burners injector size: 0.85mm
Countries intended for: CH
France (FR)
Gas category: I3+(28-30/37)
Gas type and pressure: Propane/37mbar
Maximum gas consumption: 218gm/h
Total heat input: 3kW
Main burners injector size: 0.85mm
Countries intended for: FR
TROUBLESHOOTING
PROBLEM
Burner will not light using the
ignition system
Low flame or flashback (fire in
burner tube - a hissing or roaring
noise may be heard)
Gas valve knob difficult to turn
HOW TO REACH US IF YOU NEED OUR SERVICE
Contact your local IKEA store. You will find the address
and phone number in the IKEA catalogue or at www.
IKEA.com.
To ensure that we provide you with the best
assistance, please read carefully the Assembly
Instructions and/or the User Instruction section of this
manual before contacting us.
8
Italy (IT)
Gas category: I3B/P(30)
Gas type and pressure: Propane/30mbar
Maximum gas consumption: 218gm/h
Total heat input: 3kW
Main burners injector size: 0.85mm
Countries intended for: IT
Belgium (BE)
Gas category: I3+(28-30/37)
Gas type and pressure: Propane/37mbar
Maximum gas consumption: 218gm/h
Total heat input: 3kW
Main burners injector size: 0.85mm
Countries intended for: BE
Changing The Gas Cylinder
Check that the burners are extinguished before
disconnecting the gas cylinder.
Check the seals before connecting a new gas cylinder
to the appliance.
Change the gas cylinder outside and away from
people.
POSSIBLE CAUSE
LP gas cylinder is empty
Faulty regulator
Obstructions in burner
Obstructions in gas jets or gas hose
Electrode wire is loose
Electrode or wire is damaged
LP gas cylinder too small
Obstructions in burner
Obstructions in gas jets or gas
Windy conditions
Gas valve jammed
SOLUTION
Replace with full cylinder
Have regulator checked or
replace
Clean burner
Clean jets and gas hose
Reconnect wire
Change electrode and wire
Use larger cylinder
Clean burner
Clean jets and gas hose
Use BBQ in a more sheltered
position
Replace gas valve

Advertisement

loading