Hama Teens Guard Operating Instructions Manual page 7

5. Charging
Fully charge the headphones once before using them for the first time .
1
Switch off the headphones and connect them
Ensure that the headphones are switched off before charging them .
Connect the USB charging cable included to the charging socket (6) . Connect the free plug on the
micro-USB charging cable to a suitable USB charger . To do this, consult the operating instructions
for the USB charger you are using .
micro USB
2
Charging process for the headphones
The LED (4) lights up solid red during the charging process .
Once the charging process is complete, the LED (4) goes out .
It can take up to 2 hours for the battery to be fully charged .
3
Battery capacity
When the headphone battery capacity is low, the LED (4) flashes red and the announcement
"Battery Low" is heard .
Note
During the charging process, the Bluetooth
2
CHARGING
red
® connection is automatically disconnected .
:00
h m CHARGED
off
7