Daily Testing; Settings; Malfunctions - Linde 120 Series Original Instructions Manual

2
Function

Daily testing

Daily testing
 Check the motion detection assistance sys-
tem (1) for contamination and damage be-
fore starting each shift. Clean as required.
NOTE
Clean with a damp cloth or commercially avail-
able cleaners.
 Check the external cable duct for damage.
If there is any damage, contact your service
partner.

Settings

The following settings can be configured by
the service partner:
Lateral range: 0...4 m
●
Rear range: 0...10 m
●
Warning via buzzer: on/off
●
Buzzer activation time
●
Monitoring time (factory setting: 1 s)
●
Monitoring deactivation time via push button
●
(6) (factory setting: 10 s)
Moving off in the forwards drive direction
●
(optional): on/off
 Contact your service partner.

Malfunctions

In the event of malfunctions in the motion de-
tection assistance system, the symbol (4) in
the status bar of the display unit is hidden.
Malfunction due to operating error
The push button for temporarily deactivating
the motion detection assistance system was
pressed for longer than 10 s.
8


4
Operating Instructions - 12008011541 EN - 10/2021 - 01
1
MD_0001
Display_1134