Linde 120 Series Original Instructions Manual page 11

Once the electrical system is switched on and
the symbol (4) in the status bar illuminates in
the display unit, the motion detection assis-
tance system is active.
Persons or objects detected
If persons or objects are detected, the mes-
sage "Check rear area" appears in the display
unit and the buzzer sounds.
Moving off in the backwards drive direction is
prevented.
 To switch off the message, push the
ton or the "rotary-push button" on the
120x/125x series.
It is also possible to prevent the truck from
moving off in the forwards drive direction (op-
tional) when persons or objects are detected
behind the truck and a specific steering angle
is set.
Persons or objects are no longer detec-
ted
When persons or objects are no longer detec-
ted in the monitoring area, the message
"Check rear area" is cleared after 1 second
(factory setting) and the buzzer stops.
 Moving off in the backwards drive direction
is possible again after the accelerator pedal
has been moved once to the neutral posi-
tion.
Operating Instructions - 12008011541 EN - 10/2021 - 01

4
but-
2
Function
Operation
Display_1134
5