Basalte FIBONACCI KNX Installation Manual

FIBONACCI KNX
Installation Manual
0272-02-xx
Description
Fibonacci KNX is a touch-sensitive switch with a unibody design which combines electronics and cover in one
single article.
The separate touch-sensitive surfaces of Fibonacci each control various functions, using both short and long
press.
By touching more than one surface at the same time, additional comfort functions can be activated including
room toggle, scene sequencer and RGB sequencer. The multicolour LED backlight provides status feedback
and can be used as night light.
Fibonacci also has a built-in temperature sensor and integrated thermostat logic. A scene controller can
control up to 6 scenes and 8 outputs per scene.
Model No.
0272-02-XX Fibonacci dual KNX
0274-02-XX Fibonacci quad KNX
D
A RGB LED
B Programming button
C Temperature sensor
D Programming LED
E Label backlight
Fibonacci is designed to be wall mounted in portrait orientation. Fibonacci KNX requires a minimum
mounting depth of 22mm from the back side of Fibonacci plus room for cable(s).
0274-02-xx
Compatible Fibonacci accessories
0272-00 Fibonacci custom dual label set
0274-00 Fibonacci custom quad label set
(*) contact your sales representative to order custom label
C
B
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
A
E
E
sets
A
E