Setting Wep Encryption - Belkin F5D8235-4 User Manual

PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc1
Page 57 of 120

Setting WEP Encryption

Note to Mac users: The "Passphrase" option will not operate with Apple
®
AirPort . To configure encryption for your Mac computer, set the encryption using
the manual method described in the next section.
1. Select "128-bit WEP" or "64-bit WEP" from the drop-down menu.
2. After selecting your WEP encryption mode, you can enter you WEP key
manually by typing in the hex WEP key manually, or you can type a
passphrase in the "PassPhrase" field and click "Generate" to create a WEP
key from the passphrase. Click "Apply Changes" to finish. You must now set
all of your clients to match these settings.
3. Encryption in the Router is now set. Each of your computers on your wireless
network will now need to be configured with the same passphrase. Refer to
®