ADF Web HD67E17-A1 User Manual page 20

Ethercat / mqtt - converter
Table of Contents

Advertisement

Industrial Electronic Devices
T
:
LS
This section is used to define the parameters of TLS protocol. The means of the fields
are:
If the field
"Enable
TLS" is checked, the TLS protocol for secure connection is
enabled;
If the field
"Server
Authentication" is checked, the authentication of the Server
using TLS is enabled. If enabled, in the field
from the Server is defined;
If the field
"Client
Authentication" is checked, the authentication of the Client
using TLS is enabled. If enabled:
in the field
"Client
o
in the field "Client Key" the private key of the Client is defined;
o
in the field "Client Key Password" the password for the private key of the
o
Client is defined.
NTP (N
T
P
ETWORK
IME
ROTOCOL
This section is used to define the parameters of NTP protocol. The means of the fields
are:
In the field
"Server
URL" the URL or the IP Address of the NTP Server is
defined;
In the field
"Poll Time
is defined.
ADFweb.com S.r.l.
"Server
Certificate" the certificate from the Client is defined;
):
(seconds)" the polling time for the time synchronization
Document code: MN67E17_ENG
Certificate" the certificate
User Manual EtherCAT / MQTT
Revision 1.000
Figure 3g: "Set Communication
Figure 3h: "Set Communication
Page 20 of 31
TLS" window
NTP" window

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HD67E17-A1 and is the answer not in the manual?

This manual is also suitable for:

Hd67e67-a1

Table of Contents