GE GTH22SBSSS Owner's Manual & Installation Instructions page 21

TRANSFER FRESH FOOD DOOR
7
HANDLE TO THE RIGHT
Reinstalling the handle: Attach the handle to the
right side of the door.
Stainless steel handle:
Attach the handle
to the fastener and
tighten with the 3/32"
Allen wrench
(supplied). Line
up the handle with the
screw holes in the top
of the door and
tighten the screws.
Plastic handle:
Attach the handle
to the fastener and
slide it down into
position. Line up
the handle with the
screw holes in the top
of the door and
tighten the screws.
Installation Instructions
(CONT.)
2
1
2
1
21
TRANSFER FREEZER DOOR
8
HANDLE TO THE RIGHT
Stainless steel handle:
Remove the two
screws holding the
handle to the bottom
of the door. Loosen the
set screw with the
3/32" Allen wrench
(supplied) and remove
the handle.
Remove the handle
fastener with the 3/16"
Allen wrench
(supplied). Transfer
the fastener to the right
side and move the GE badge to the left side of the
freezer door. Remove the paper covering on the
adhesive backing prior to attaching the badge to
the door.
Plastic handle:
Remove the two
screws holding the
handle to the bottom
of the door. Slide
the handle down on
the fastener and
remove the handle.
Remove the handle
fastener with the 3/16"
Allen wrench
(supplied). Transfer
the fastener to the right side and move the GE badge
to the left side of the freezer door. Remove the paper
covering on the adhesive backing prior to attaching
the badge to the door.
Reinstalling the handle: Attach the handle to the right
side of the door.
Stainless steel handle:
Attach the handle to
the fastener and tighten
with the 3/32" Allen
wrench (supplied).
Line up the handle
with the screw holes in
the bottom of the door
and tighten the screws.
Plastic handle:
Attach the handle
to the fastener and slide
it up into position.
Line up the handle
with the screw holes in
the bottom of the door
and tighten the screws.
2
Fastener
1
Fastener
3
2
1
1
2
1
2
3
4