Table of Contents
Advertisement
Energy Meter Setup Guide
Step:
1. Install the Energy Meter at your electrical distribution board (DB) per the above diagram.
2. Open Maevi App and go to "Energy Monitoring" tab.
3. Select "Add Device +" button at the top of the monitoring page to start the pairing process.
4. The Gateway will now start searching for new devices to be paired with.
5. Immediately during the searching process, single press the Reset button on the Energy Meter
to complete the process.
Tip: You can also press and hold the "Z" button on the gateway for 2 seconds until LED
indicator turns steady blue to permit joining device. Single press "Reset" button on the Energy
Meter to pair with the Gateway.
6
Pairing Device
Button
Advertisement
Table of Contents
