Table of Contents Three Phase Energy Meter Specifications ..................3 Electrical Contacts ..........................3 LED Indicators ............................4 Wiring Diagram for Three Phase Energy Meter ................5 Energy Meter Setup Guide ......................6 Reset Energy Meter ........................8 Reset Energy Meter Connection ....................8 Reset Energy Meter (Flush Energy Counter) ..................
Three Phase Energy Meter Specifications Electrical Contacts Connector Description Phase L1 Phase L2 Phase L3 Neutral Night Tariff Current Transformers Black Wire LED1 Relay On/Off LED2 Network Status Power Relay 100~240V/ac Relay Latch + Relay Latch - CTR1 Current Transformers 1 Red Wire CTR2 Current Transformers 2 Red Wire CTR3...
Button/Reset Button LED1 Indicator (ON/OFF) LED2 Indicator (STATUS) LED Indicators LED Status What it means LED1 On Relay Switch On LED1 Off Relay Switch Off LED1 Slow Blinking LED2 Off Idle state, not associated with a network, waits for Man/Machine interaction LED1 Fast Blinking LED2 Off Beacon state, not associated with a network, in “ready to join”...
1. Install the Energy Meter at your electrical distribution board (DB) per the above diagram. 2. Open Maevi App and go to "Energy Monitoring” tab. 3. Select "Add Device +" button at the top of the monitoring page to start the pairing process.
Page 7
6. The Energy Meter is successfully paired with the Gateway when LED1 Indicator turns solid and LED2 Indicator blinks. 7. Refresh the "Energy Monitoring" page by pull it down and release. The Energy Meter should now appear in the app as unique serial number. 8.
Reset Energy Meter A) Reset Energy Meter Connection Step: 1: Press and Hold "Reset" button until the status LED1 indicator blinks 6 times before releasing it. 2: If successful, the status LED1 indicator will blink slow and status LED2 indicator will turn off.
Feature of Energy Meter Consumption period Real-time consumption Real-time status vs budget consumption chart Real-time consumption chart Energy Analysis Button Energy Meter details Select date and Energy Meter to retrieve data for analysis Retrieved data for analysis Total Cost Total Energy...
Add Energy Meter to Home Select Energy Meter Select Edit Button Select Energy Meter Select Edit Button Select Home Button Select Energy Meter Select Edit Button Select Home Button Select Energy Meter Select Energy Meter Select Edit Button Select Edit Button Select Home Button Select Home Button Select House...
Set Billing Cycle Date Select Billing cycle Select Billing cycle Select Edit Button Settings Page start date start date Enter your billing cycle Succesfully set Billing start date. The date cycle start date can be found in your electricity bill CONFIRM...