Safety, Installation And Application Information - Nord Drivesystems SK 300P Series Manual

Table of Contents

Advertisement

NORDAC ON / ON+ (SK 3xxP) – Manual with installation instructions
Text
Type of information
Instructions
Bullet points
Parameter
Arrays
Factory settings
Software descriptions
Numbers
Type of information
Binary numbers
Hexadecimal numbers
Symbols used
Type of information
Cross-reference
Hyperlink
Type designations
Designation
SK 1x0E
SK 2xxE
SK 2x0E-FDS
SK 3xxP
SK 5xxE
SK 5xxP

1.5 Safety, installation and application information

Before working on or with the device, please read the following safety instructions extremely carefully.
Please pay attention to all other information from the device manual.
Non-compliance can result in serious or fatal injuries and damage to the device or its surroundings.
These safety instructions must be kept in a safe place!
1. General
Do not use defective devices or devices with defective or damaged housings or missing covers (e.g.
blind plugs for cable glands). Otherwise, there is a risk of serious injury or death from electric shock or
rupture of electrical components, e.g. high power capacitors.
12
Example
1.
2.
P162
[-01]
{ 0.0 }
"Cancel"
Example
100001b
0000h
Example
 Chapter
 Supplementary
manual
http://www.nord.com/
Description
Frequency inverter of SK 180E series
Frequency inverter of SK 200E series
Frequency inverter of SK 250E-FDS series
Frequency inverter of SK 300P series
Frequency inverter of SK 500E series
Frequency inverter of SK 500P series
Marking
Instructions whose sequence must be complied with
are numbered sequentially.
Bullet points are marked with a dot.
Parameters are indicated by a "P" prefix, a three-
digit number and bold lettering.
Arrays are indicated by square brackets.
Factory settings are indicated by curly brackets.
Menus, fields, windows, buttons and tabs are
indicated by quotation marks and bold lettering.
Marking
Binary numbers are indicated by the suffix "b"
Hexadecimal numbers are indicated by the suffix "h"
Marking
Internal cross-reference: A mouse click on the text
calls up the stated point in the document.
External cross-reference
References to external websites are indicated in
blue and underlined. A mouse click calls up the
website.
BU 0800 en-4521

Advertisement

Table of Contents
loading

Table of Contents