GE 27939 User Manual page 28

I P
NSERTING A AUSE IN THE
Press the #PAUSE button on the number pad twice to insert a delay in dialing
sequence of a stored telephone number when a pause is needed to wait for a
dial tone (for example, after you dial 9 for an outside line, or wait for a
computer access tone.) Each pause counts as 1 digit in the dialing sequence.
R , C
EVIEWING HANGING OR
To Review: press mem (memory), then press the CID (up or down arrow)
buttons (or memory location number) to scroll through the stored
numbers.
To Change: Use the same procedure to change a stored number as you do
to store a number and just replace one stored phone number with a
different one.
To Delete: Press mem (memory), then press the CID (arrow up or down)
buttons to scroll to a desired entry.
1. While the entry is displayed, press redial/delete to mark the entry for
deletion. The display shows DELETE?
2. Press redial/delete a second time to delete the entry. DELETED is displayed.
NOTE: If you don't want to change or delete a number, simply press the
cancel button or wait for 1 minute to exit Review mode.
D S
IALING A TORED
Handset:
Make sure the phone is ON by pressing the TALK/callback button.
28
All manuals and user guides at all-guides.com
D
IALING
D
ELETING
N
UMBER
S
EQUENCE
S N
TORED UMBERS