Advertisement
OPERATION
Getting started
1.
Fill the water tank, by opening the tank plug, filling with water tank (350ml water
capacity), and replacing the tank plug.
Open tank plug
2.
Plug in the appliance to a grounded wall outlet.
3.
Press the power switch. The indicator lights will turn red, indicating preheating. If
the lights do not turn on, please check the Troubleshooting section at the back of
this user guide for more details.
4.
The appliance warm-up time is 25 seconds. When preheating is complete, the
indicator light will turn to be blue, and the appliance will be ready for use.
Notes:
If a power failure occurs in the middle of the warm-up, or power-off occurs after the
warm-up is complete, turn the power supply on again. Depending on the time
between power off and on, the appliance may repeat the above warm-up operation.
Fill tank
Replace plug
Advertisement
