Advertisement
CLEANING & CARE
WARNING: Do not immerse the appliance in water.
Ensure that the product is powered off and unplugged before cleaning the appliance.
Empty the water tank after use every time and clean the water tank.
How to decalcify the water tank interior
To clean calcium deposits that builds up inside the water tank, add one or two tablespoons
of white vinegar to water tank and then shake the contents. Let it sit for several hours, then
pour away the solution and rinse with clean water.
Cleaning procedure to remove scale.
If your steam mop outputs steam more slowly than usual, or no steam, you may need to
remove lime scale. Lime scale can develop over time on the metal parts and greatly affect
steam mop performance.
It is necessary to remove lime scale on regular basis every 25-50 times you use a full tank of
water, or at least once a month, especially in areas with hard water.
The frequency of lime scale removal depends upon the hardness of you tap water and how
often you use the steam mop.
By using cleaning solution
1.
Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water
tank.
2.
Secure and position the unit to ensure steam released is aimed away from the floor
or surrounding objects and surface. Plug the unit in, turn the unit ON by pressing
the power switch and allow the unit to produce steam unit the vinegar/water
solution in used up.
3.
Repeat the above procedure as many times as necessary unit a normal steam flow
rate is achieved.
4.
Fill the water tank with fresh water and rinse ours.
5.
Fill the water tank with fresh water, attach to the unit and releasee steam through
the system unit the water tank is empty.
WARNING: Don't leave the appliance during the lime scale removal
process and/or while in use
Advertisement
