Product Description And Specifications - Bosch Professional GAS 25 Original Instructions Manual

OBJ_BUCH-793-003.book Page 7 Wednesday, April 27, 2011 7:40 AM
Symbols
The following symbols could have a meaning for the use of your vacuum cleaner. Please take note of the symbols and their mean-
ing. The correct interpretation of the symbols will help you to use the vacuum cleaner in a better and safer manner.
Symbol
Product Description and
Specifications
Intended Use
The vacuum cleaner is intended for vacuuming and extraction
of materials that are not hazardous to one's health and for
non-flammable liquids. It is suitable for the increased de-
mands of industrial usage, as required in trades, industry and
workshops.
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Cable holder
2 Carrying handle
3 Vacuum lid
4 Mode selector switch
5 Socket for power tool
6 Lock
7 Hose connection piece
8 Vacuum hose
9 Container
10 Latch of the vacuum cover
11 Dust bag
12 Folded filter
13 Motor protection filter
14 Level sensors
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Bosch Power Tools
Meaning
Read all safety warnings and all instruc-
CAUTION
tions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury.
Fold up the vacuum lid 3 and hold it. Grasp the folded filter 12
by the fins, pull up and remove.
Technical Data
All-Purpose Vacuum Cleaner
Article number
Rated power input
Frequency
Container volume (gross)
Net volume
Dust bag contents
Vacuum, max.*
Airflow, max.*
Suction capacity
Surface of folded filter
Weight according to
EPTA-Procedure 01/2003
Protection class
Degree of protection
* measured at the blower
The values given are valid for nominal voltages [U] of 230 V. For lower
voltage and models for specific countries, these values can vary.
Please observe the article number on the type plate of your vacuum
cleaner. The trade names of the individual vacuum cleaners may vary.
Assembly
Before any work on the vacuum cleaner itself, pull the
mains plug.
Replacing/Inserting the Dust Bag (see figure A)
– Unlock the latches 10 and remove the vacuum lid 3.
– Pull off the full dust bag 11 from the connection flange to-
ward the rear. Close the opening of the dust bag by folding
down the lid. Remove the closed dust bag from the vacuum
cleaner.
English | 7
GAS 25
Professional
0 601 979 1..
W 1200
Hz 50/60
l 25
l 16
l 9
hPa 248
3
m /h 220
W 316 (6 mbar)
2
cm 4300
kg 11.8
/I
IP 24
1 609 929 V17 | (27.4.11)