Mitsubishi Electric PKFY Series Technical & Service Manual page 18

9 REMOVING THE LINE FLOW FAN
(1) Remove the terminal block cover.
(2) Remove the front panel. (See Photo 1)
(3) Remove the electrical parts box. (See Photo 7)
(4) Remove the nozzle assembly. (See Photo 6)
(5) Remove the fan motor. (See Photo 8)
(6) Remove the pipe fixture with 2 screws. (See Photo 11)
(7) Remove the left / right screws of the heat exchanger and
pull the left-hand side up.
(8) Remove the 2 screws by sliding it toward you remove the
fixture (fixing bearing).
w When the fan is hard to remove, remove the fan motor first.
w When resetting the fan to the fan motor, locate and fix the
shaft after installing the fan.
10 REMOVING THE HEAT EXCHANGER
(1) Remove the terminal block cover.
(2) Remove the front panel. (See Photo 1)
(3) Remove the electrical parts box. (See Photo 7)
(4) Remove the corner box.
(5) Remove the nozzle assembly. (See Photo 6)
(6) Remove the 2 screws and the pipe fixture.
(7) Remove the 2 screws and heat exchanger.
OC179B
(Photo 10)
Heat exchanger
Set screws
Fixture (fixing bearing)
(Photo 11)
Set screw
Pipe fixture
18
Heat exchanger
Set screws