Table of Contents
Advertisement
Reference frequency adjustment
UHF high-power adjustment
UHF low-power adjustment
VHF high-power adjustment
VHF low-power
28
1. In the adjustment mode, select channel 1 by rotating the main tuning dial.
2. Press the
key to start transmission.
3. Rotate TC1 on the main board until the value on the frequency counter
matches the one displayed on the LCD.
1. In the adjustment mode, select channel 2 by rotating the main tuning dial.
2. Hold down the
3. While watching the reading of the TX power meter, set the output power to
the value closest to 4.5W by rotating the main tuning dial.
4. When the
key is released, the output power at that time will be
stored as the high power setting.
1. In the adjustment mode, select channel 3 by rotating the main tuning dial.
2. Hold down the
3. While watching the reading of the TX power meter, set the output power to
the value closest to 0.8W by rotating the main tuning dial.
4. When the
key is released, the output power at that time will be
stored as the low power setting.
1. In the adjustment mode, select channel 4 by rotating the main tuning dial.
2. Hold down the
3. While watching the reading of the TX power meter, set the output power to
the value closest to 4.5W by rotating the main tuning dial.
4. When the
key is released, the output power at that time will be
stored as the high power setting.
1. In the adjustment mode, select channel 5 by rotating the main tuning dial.
2. Hold down the
3. While watching the reading of the TX power meter, set the output power to
the value closest to 0.8W by rotating the main tuning dial.
4. When the
key is released, the output power at that time will be
stored as the low power setting.
key to start transmission.
key to start transmission.
key to start transmission.
key to start transmission.
Advertisement
Table of Contents
