Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for XAG ACB1 CommBack
Summary of Contents for XAG ACB1 CommBack
- Page 1 ACB1 CommBack Quick Start Guide Version 1.0...
- Page 2 To users: Dear users, thank you for choosing XAG products For SAFETY reasons and for the best experience possible, XAG recommend that you should read through this Quick Start Guide and Disclaimer within this document before attempting to use the ACB1 CommBack...
-
Page 3: List Of Items
List of items Before unpacking and using the product, please carefully check to see if it contains all the items listed in this list. Please contact XAG or your dealer if there are any missing items. USB To Type-C Micro USB To Type-C Type-C To Type-C Data cable ×1... - Page 4 Overview Main components of the ACB1 CommBack are as follows: Antenna Press-to-talk button Speaker Power button Indicator LEDS Control keypad Data Port (Type-C) View 1 View 2 Indicator LEDS LED 1 Battery Level LEDS LED 2 Device connectivity LEDS LED 3...
-
Page 5: Checking Battery Level
Repeat Step 1 to turn off the CommBack 2. Checking battery level Press the power button once to check the current battery level. When ACB1 CommBack is OFF, the indicator LEDS displays the battery level of the CommBack. See the below for details on these indicators. -
Page 6: Firmware Update
3.Charging the CommBack ACB1 CommBack can be charged by standard USB Adapter with a USB to Type-C Cable. During charging, the Battery level LED indicates the status of the Charging. See the table below for details on these indicators. Charging mode... -
Page 7: Device Connection
Repeat this process if the firmware update are unsuccessful 5.Device connection STEP 1 – Connect the ACB1 CommBack with an Type-C USB Cable to STEP 1 – the Smart Phone STEP 2 – Start XPLANET APP and ensure the device is connected STEP 2 –... - Page 8 STEP 4 – If the pairing process is successful, an notification will STEP 4 – appear “Pairing successful”, and the device will be STEP 4 – displayed on the device interface STEP 5 – Repeat this process if the firmware update are STEP 4 –...
- Page 9 ① Forward key ④ Right key ② Left key ⑤ Backward key ③ Emergency key...
-
Page 10: Specifications
Specifications Model: ACB1 Dimensions: 112×73×34 mm(when the antenna is folded) 119×73×34 mm(when the antenna is expanded) Operating frequency: 2.4 GHz/ 5.8 GHz Transmission power: 23 dbm Effective signal distance (without any interference/blocking) : 1km Built-in battery capacity: 3500 mAh/ 18 WAh Charging environment temperature: 5 °C to 45 °C Charging voltage/current: 5 V/ 2 A 、9 V/ 1.5 A 、12 V/ 1.5 A Mesh network: support... - Page 11 Attachment: Refer to the table below for more information about the Indicator LEDS Indicator on CommBack LED light display 60%-100% SOLID GREEN 20%-60% SOLID YELLOW SOLID RED 5%-20% LED 1 QUICK FLASH RED Low Battery Device will (Battery Level begin au automated LEDS) shutdown...
- Page 12 Visit our website for more information www.xa.com This Guide is subject to update without XAG official account XPLANET official account prior notice.