Spray Arms - VALBERG 14S42 C XAD929C Instructions For Use Manual

C
Useful information

Spray arms

You should regularly clean the spray arms to prevent the hard water mineral content from
clogging the jets and spray arm bearings.
To clean the spray arms, follow the instructions below:
To remove the upper spray arm, hold the centre locknut still and rotate the spray arm anti-
clockwise to release it.
To remove the lower spray arm, lift it upwards.
Wash the spray arms with warm soapy water and use a soft brush to clean the jets. After
rinsing well, position them back inside the machine.
31 EN