GE Profile JGP989 User Manual page 27

ATTACHING A BLOWER
13
TRANSITION DUCT
Use a blower transition duct for all downward
duct installations to connect to 6" round
standard ductwork. This 3
to 6" round transition duct is available at
your local building supply store.
Screws
Install the transition duct to the blower outlet.
Secure all joints with duct tape to assure an
airtight seal.
Installation Instructions
INSTALLING THE COOKTOP
" x 10" rectangle
1 ⁄
4
Screw
(on other
side)
CONNECTING THE DUCTWORK
14
Connect the ductwork prepared in Steps 5 and
6 to the blower transition duct.
27