Table of Contents
Advertisement
Quick Links
TONNEAU INSTALLATION INSTRUCTION
D22 Navara 4WD ST-R Dual Cab
Package includes
1 X Tonneau cover
1 x Tonneau Support Bar (300516)
3 x Aluminium Rope Track-461mm long ea.
1 x Support Bar Sheath
1 x Fitting Instructions
1 x Warranty Card
Without Sports Bars
Oct 2009 – June 2015
Part number: 325NSB
2 x Bar Brackets (300474)
26 x Rivets (300482)
1 x Lock Bracket
14 x Rope Buttons (300473)
4 x Dowel
Advertisement
Table of Contents
Related Manuals for Tuff Tonneaus 325NSB
Summary of Contents for Tuff Tonneaus 325NSB
- Page 1 TONNEAU INSTALLATION INSTRUCTION D22 Navara 4WD ST-R Dual Cab Without Sports Bars Oct 2009 – June 2015 Part number: 325NSB Package includes 1 X Tonneau cover 2 x Bar Brackets (300474) 1 x Tonneau Support Bar (300516) 26 x Rivets (300482) 3 x Aluminium Rope Track-461mm long ea.
- Page 2 Table of Contents TONNEAU COVER FITTING ......................3 1.1 BASIC TOOL REQUIRED ......................... 3 1.2 TONNEAU COVER INSTALLATION PROCEDURE ................3 TONNO LOCK ........................... 5 2.1 BASIC TOOL REQUIRED ......................... 5 2.2 TONNO LOCK CONTENTS ......................6 2.3 FITTING TONNO LOCK ........................6 MULTI-FIT SUPPORT BAR ........................
- Page 3 1. 1. 1. 1. TONNEAU COVER FITTING TONNEAU COVER FITTING TONNEAU COVER FITTING TONNEAU COVER FITTING NOTE Read entire instructions prior to start. 1.1 BASIC TOOL REQUIRED 1.1 BASIC TOOL REQUIRED 1.1 BASIC TOOL REQUIRED 1.1 BASIC TOOL REQUIRED Drill, 4mm Drill Bit, Rivet Gun, Marking Pencil / Pen 1.2 TONNEAU COVER INSTALLATION PROCEDURE 1.2 TONNEAU COVER INSTALLATION PROCEDURE 1.2 TONNEAU COVER INSTALLATION PROCEDURE...
- Page 4 Figure 1 Placement of aluminium rope track. Ensure channel is above the tub’s top edge. Figure 2 Placement of rope button is on tailgate panel crease as per measurements. Figure 3 Placement of rope button is on the side, is under panel crease as per measurements.
- Page 5 TONNO LOCK TONNO LOCK The Tonno Lock is now a standard feature included with all Tuff Tonneaus. The Tonno Lock is situated at the front of the tonneau cover, so as not to impede the accessibility of the Tuff Tonneau.
- Page 6 You will need to buy a small Padlock- make sure the padlock will go through the hole on the Tonno lock. 2.2 TONNO LOCK CONTENTS TONNO LOCK CONTENTS TONNO LOCK CONTENTS TONNO LOCK CONTENTS 2 X 4MM Aluminium rivets 1 x Tonno Lock bracket 2.3 FITTING TONNO LOCK FITTING TONNO LOCK FITTING TONNO LOCK...
- Page 7 2. Join the pieces back together and screw grub screws through the hollow bar into the holes that Make sure you do not over tighten the grub screws you drilled. . Then place the tonneau sheath over the bar to stop the bar wearing against the tonneau. Refit the bar. You may kink the bar in the middle to give it some extra height to assist with water runoff.
Need help?
Do you have a question about the 325NSB and is the answer not in the manual?
Questions and answers