Storage When Not In Use; Troubleshooting; Cleaning - Parkside PKI 2.8 B1 Operating Instructions And Safety Instructions

6.6 Storage when not in use

If you will not be using the borescope for a long period of time,
remove the batteries to prevent any leaking.
Store the clean and dry borescope and its accessories in the
supplied instrument case [B] and in a dry, cool place.

7. Troubleshooting

The device does not switch on.
1. The batteries may be empty, fit new batteries.
2. Test that the batteries are fitted with the correct polarity.
The pictures show stains or shadows.
1. Clean the lens on the camera head [1] with a slightly moistened cloth.
No more pictures can be captured.
1. The memory is full. Delete some pictures.
The pictures or the display [2] are very dark.
1. Adjust the display brightness.
2. Turn on the lighting.

8. Cleaning

If dirty, clean the device with a dry cloth or use a slightly damp cloth for
stubborn dirt. Make sure not to apply any strong pressure when cleaning the
display [2] in order to avoid damage to the display [2]. Do not use any
solvents, irritants or gaseous cleaners. No moisture must penetrate into the
main unit.
To clean the gooseneck, use a slightly dampened cloth and, if necessary, with
some dishwashing liquid.
PARKSIDE PKI 2.8 B1
English - 39