Display Brightness; Zoom Function; Customising The Display; Switching To Black And White Display - Parkside PKI 2.8 B1 Operating Instructions And Safety Instructions

PARKSIDE PKI 2.8 B1

6.5.3 Display brightness

You can use the Display brightness button [7] to adjust the brightness of the
display [2]. Pressing this button multiple times will stepwise increase the display
[2] brightness. There are 10 adjustable levels. Once the highest level has been
reached, pressing the Display brightness button [7] again will reset the
brightness to the lowest value. The value will be reset to the default if you power
the camera off and back on.

6.5.4 Zoom function

You can use the Zoom button [3] to enable the zoom function. Press this button
to increase the zoom stepwise. There are four zoom levels available. Once the
highest zoom level has been reached, pressing the Zoom button [3] again will
disable the zoom. The value will also be reset to the default if you power the
camera off and back on.

6.5.5 Customising the display

Press and hold the Display brightness button [7] for approx. 2 seconds to
customise the display. This setting allows you to show the picture in four
different views: Rotate display 180°, mirror display, mirror display plus rotate
the display 180°, and normal display. If you change the setting and then
power the camera off and back on, the picture display will be reset to the
default value.

6.5.6 Switching to black and white display

Press and hold the Zoom button [3] for approx. 2 seconds to toggle the display
between black and white, and colour. The function will be reset to colour
display if you power the camera off and back on.
English - 35