Inserting Or Replacing The Batteries - Parkside PKI 2.8 B1 Operating Instructions And Safety Instructions

6.3 Inserting or replacing the batteries

Please make sure that your camera is switched off. The battery compartment
[10] is located on the rear of the device.
Open the battery compartment, by pushing down the catch and folding out the
battery compartment cover. The fabric strip in the battery compartment makes
it easier to take the batteries out. When inserting the batteries, make sure the
fabric strip runs all the way under all four batteries and the end of the fabric
strip is easily accessible from the top with the batteries in place.
Insert four 1.5V AA-sized / LR6
(Mignon) batteries into the battery
compartment [10]. Please note the
diagram in
compartment [10] and on the
batteries.
Then close the battery compartment
cover until it clicks in place.
the battery
PARKSIDE PKI 2.8 B1
English - 33