GE Monogram ZGU3650 Dimensions And Specifications page 3

Monogram.
ZGU3650—GE Monogram 36" Updraft Cooktop with 5 Burners
8-13/16" Min.
to Side Wall
4-5/8" Min.
Cutout to Vertical
Combustible Surface
18-1/8"
2-1/4"
Min. From
Front of
Countertop
Cautioin:
Wallcoverings, countertops and cabinets should
withstand 200°F heat generated by the cooktop.
Specification Created 7/00
™
34-1/2"
Cutout Information
Measure carefully when cutting countertop.
8-13/16"
Make sure sides of opening are parallel and rear
Min.
and front cuts are exactly perpendicular to sides.
Cutout
• The Monogram gas cooktop is designed to fit in
To Side
a 36" or larger base cabinet.
Wall
• The countertop cutout for cooktop must be:
–34-1/2" wide
–18-1/8" deep
–Allow at least 4-5/8" clearance between back
of cutout and wall.
–Allow at least 8-13/16" clearance from right
and left side of cutout to adjacent wall.
–Allow at least 2-1/4" clearance between front
of cutout and front edge of countertop.
• Cooktop requires 3" free space below countertop
• If installing cooktop above a cabinet with drawers,
is may be necessary to use a shorted length
drawer to allow clearance for gas connection.
• In some cases, two 3/8" I.D. 45° elbows and a
pipe nipple may be added between regulator and
cooktop to move regulator further back in order to
avoid interference with drawer.
For answers to your Monogram,
GE Profile Performance Series,
GE Profile
GE Answer Center
®
™
™ or GE appliance questions, call
® service, 800.626.2000.