Using The Nsb-25 As A Hard Drive (Or Ssd); Connection To Computer - Nexto Di STORAGE BRIDGE User Manual

14:30:29 10-JAN-2013
00:06:23
New SxS
Syncing
HDD 0
780 GB
3 / 4 Folders
HDD 1
20140728.000.123456
780 GB
USB3.0
780 GB
14:30:29 10-JAN-2013
New SxS
Sync Success
HDD 0
780 GB 4 / 4 Folders
HDD 1
780 GB
USB3.0
780 GB
Reference
● If an error occurs during the "Export folder" function, the NSB-25 will
automatically shut down and display an error message.
● If you don't make any operation after the completion of backup, the power is
turned off automatically.
● In case of that NSB-25 is automatically turned off, it displays the previous
operational status at the next power up whether the last backup was successful.
31
EXPORT FOLDER
Executing of export.
Completion of export
You can go back to previous state of
MCopy Ready, press "Back" or "OK".

16. Using the NSB-25 as a Hard Drive (or SSD)

The NSB-25 and Bridge Pellet can be connected to your computer for use as an
external hard drive.
Reference
● Users of Windows XP and Windows Server 2003 must have Service Pack 2 or
later and install an update to support exFAT. Windows Vista must be Service
Pack 1 or later for exFAT support.
● Mac OS X Snow Leopard 10.6.6 and Linux 2.4.18 and later can fully access
exFAT file systems.
● The NSB-25 and the Bridge Pellet cannot be read by any version of Windows
prior to Windows XP (Service Pack 1).
● A computer can only recognize the NSB-25 and the Bridge Pellet. A computer
cannot recognize an external USB hard drive or any memory cards that are
connected to the NSB-25. Thus, the NSB-25 cannot be used as a memory card
reader.
● If connecting to the NSB-25 via USB, use the back slot of the computer.
The front slot might not be able to process the high speed signal.

16.1. Connection to computer

(1) Turn your computer on. Wait until the operating system has completely booted.
(2) Turn the NSB-25 on.
(3) Connect the NSB-25 "USB 3.0(micro-B)" slot via the USB cable with a free
USB 3.0(Standard-A) port on your computer. A USB 2.0 port can also be used.
(4) Check the "PC Connection" on the NSB-25's LCD display.
USING THE NSB-25 AS A HARD DRIVE (OR SSD)
14:30:29 10-JAN-2013
PC Connection
32