Table of Contents
Advertisement
If you decide to assign IP addresses manually instead of DHCP, set the Router
Address field with broadband router's IP address and make sure DNS settings
are correct.
For Linux Clients
To access Internet via the broadband router, you need to set the broadband
router as the "Gateway". Make sure login as "root" before attempting any
changes.
Fixed IP Address
Most Linux installations use fixed IP address, if you wish to use a fixed IP
address, make sure make the following changes.
a) Set "Default Gateway" with the IP address of the broadband router.
b) Make sure DNS settings are correct.
To act as a DHCP Client (recommended)
The procedures below may vary depending on version of Linux and
X-windows shell.
a) Start X-Windows.
b) Select Control Panel
c) Select the "Interface" entry for your Network card. Normally, this is
called "eth0".
d) Click "Edit" button, set the "protocol" to "DHCP" and save.
e) To apply all changes, use Deactivate and Activate buttons, if it is
possible, restart your system.
All manuals and user guides at all-guides.com
Network.
16
Advertisement
Table of Contents
