Table of Contents
Advertisement
All manuals and user guides at all-guides.com
b) Select the "Internet Protocol (TCP/IP)" for the network card on your system, then
click "Properties", window shown as below will appear.
If you decide to use IP address from the Broadband Router, select "Obtain an
IP address automatically".
If you decide to use the IP address you are desired, select "Use the following
IP address".
"Subnet Mask" fields.
You must set Broadband Router's IP address as "Default Gateway".
If the DNS Server fields are empty, select "Use the following DNS server
addresses" and enter the DNS address is provided by your ISP, then click
"OK".
Checking TCP/IP Settings for Windows XP
a) Click "Start", select "Control Panel
"Local Area Connection" then select "Properties". The window shown as
below will appear.
Make sure enter correct addresses in "IP Address" and
Network Connection" and right click
12
Advertisement
Table of Contents
