Advantek Networks ABR-241H User Manual page 16

This section describes how to setup Broadband Router Internet access through DSL or
cable modem.
For Windows 9x/2000
a) Click "Start" and select "Settings
b) Select "Connection" tab then click "Setup" button.
c) Select "I want to set up my Internet connection manually, or I want to
connect through a local area network (LAN)" then click "Next".
d) Select "I connect through a local area network (LAN)" then click "Next". Make
sure all the boxes on the following LAN Internet Configuration screen are
unchecked.
e) Select "No" when "Do you want to set up an Internet mail account now?"
prompts out.
f) Click "Finish" to end setup process.
For Windows XP
a) Click "Start" and select "Control Panel
b) Select "Set up or Change your Internet Connection."
c) Click "Connection" tab, then click the "Setup" button. Click "Cancel" in the
pop-up "Location Information" window.
d) Click "Next" in the "New Connection Wizard" window.
e) Select "Connect to the Internet" then click "Next".
f) Select "Set up my connection manually" then click "Next".
g) Select "Connect using a broadband connection that is always on" then click
"Next".
h) Click "Finish" to complete the setup process.
For Macintosh Clients
To access Internet via broadband router on Macintosh system, the set up procedures
are showing below:
a) Open the TCP/IP Control Panel.
b) Select Ethernet from the Connect via pop-up menu.
c) Select Using DHCP Server from the Configure pop-up menu. The DHCP
Client ID field can be left blank.
d) Close the TCP/IP panel and save your new settings.
All manuals and user guides at all-guides.com
Control Panel Internet Options".
Network and Internet Connections."
15