Advertisement
The blue indicator flashes once, it means a photo has been taken
and saved, the unit is still in the mode of photo.
Note: It will take some time to save a file. The interval to press the
button shall not be too short for continuous photos.
→ Video recording
Set operation switch to position 2, long press power key, yellow
LED will turn on. Blue LED flashes 2 times and TX-112 starts video
recording automatically. Short press power key again, the video will
be saved and TX-112 will go into standby mode. The yellow LED
will turn on. If you want to record again just short press the power
key.
Note:
a. If the battery is low in working, the camera will save the file and
turn off automatically; please charge.
b. For continuous recording, the camera will save the file once after
each 15min and keep recording until the battery is used up or the
camera is turned off manually.
c. The loop operation of each starting and stopping of recording will
generate a new video file.
d. It will take some time to save a file, please do not operate it
during the process when the indicator is changed from blue to
yellow. For example, press the button repeatedly, connect it with a
computer. Those operations will lead to fail in saving the recorded
file, or the camera does not react to your operation anymore.
e. Please use it under a condition with sufficient illumination and
keep its body straight and stable. Keep 30cm between the camera
and the object in taking photos, ensuring the correct direction,
natural color, clear image and stable picture of a recording.
f. After 1 minute without any operation (standby) the TX-112 will
automatically power off.
→ Recording while charging
5 seconds after connecting to the adapter or a computer USB, the
adapter goes into standby mode. Then same operation like normal
using.
4
Advertisement
