Advertisement
econo cool operati o n (healthy, comfort, economi c al operati o n)
Use this operation when you want
to be comfortable in cool mode
even with energy saved.
TO SELECT ECONO COOL OPERATION
Perform the following operations while the unit is operating.
Press the
button
When the ECONO COOL operation is selected in COOL
mode, the air conditioner performs swing operation in
various cycle according to the temperature of indoor heat
exchanger.
Also SET TEMPERATURE is automatically set 2℃ higher
than in COOL mode.
To release the ECONO COOL operation:
●
Press the
button again.
What is "ECONO COOL"?
ECONO COOL operation changes the control mode from conventional room
temperature control to human body feeling control. In initial 10 minutes of
operating, the air flow blows downwards to cool the living area at first,and then
it blows upwards to cool the whole room. And the swing operation is performed
according to the air outlet temperature. The air flow blows downwards
periodically to stimulate human body by cooling wind. When the air outlet
temperature is low, the downward blow time is short, otherwise it is slightly long.
So it may prevent overcooling and unwell caused by a long time downward
blows. The variations of room temperature is same as that of conventional air
conditioner. Because human body is cooled ahead of the whole room, and is
stimulated by periodic cooling wind, so even though the room temperature is
2°C higher than that of conventional air conditioner, you may have the same
cooling feeling, (e.g. you may have the same cooling feeling in ECONO COOL
mode while the room temperature is 26℃ as in constant cool mode while the
room temperature is 24℃) as a result, it can save about 20% energy.
NOTE
ECONO COOL operation is available only in MANUAL COOL
mode.
When the
button is pressed or the operation mode is
changed during the ECONO COOL operation, ECONO COOL
operation is released.
The
button, the
available.
41
or
button and ON/OFF timer are
Advertisement
