Advertisement
manual operation (cool, Dry, fan)
With this operation mode,the
temperature and airflow direction
can be finely adjusted by
selecting the operation mode.
TOO
TOO
ON/OFF
WARM
COOL
STOP
FAN
MODE
VANE
START
ECONO COOL
WIDE VANE
HR.
LONG
MIN.
RESET CLOCK
+
The details displayed on the indoor unit are
the same as those in the "i feeL...".See
page31.
To select the"COOL","DRY"OR"FAN"MODE
1
Press the
button.
2
Select the operation mode by pressing the
Each time the button is pressed,the operation mode is changed
is sequence,from "I FEEL...","COOL","DRY"to"FAN".
To stop operation:
●
Press the
button.
After the operation mode is set once,the operation starts in
the mode set previously from the next time by simply pressing
the
button.
When the set temperature is to be changed:
Press the
button to lower
the temperature.
O n e p r e s s l o w e r s t h e
temperature by about 1℃.
Press the
button to raise
the temperature.
One press raises the temperature
by about 1℃.
IN DRY OPERATION
The temperature control (temperature setting) cannot
be done.
The room temperature is slightly lowered in this
operation mode.
NOTE
When the ambient temperature is too high,the room
temperature may not reach the set temperature since
the unit operates to cool at high load.
36
button.
Advertisement
