Installation - Raven CAN Switch Box Installation And Operation Manual

At Raven Industries, we strive to make your experience with our
products as rewarding as possible. One way to improve this experience
is to provide us with feedback on this manual. Your feedback will help
shape the future of our product documentation and the overall service
we provide. We appreciate the opportunity to see ourselves as our
customers see us and are eager to gather ideas on how we have been
helping or how we can do better. To serve you best, please send an
email with the following information to
-Cruizer II™ Operation Guide
-Manual No. 016-0171-415 Rev. E
-Any comments or feedback (include chapter or page numbers if
applicable).
-Let us know how long have you been using this or other Raven
products.
We will not share your email or any information you provide with anyone
else. Your feedback is valued and extremely important to us.
Thank you for your time.

Installation

Refer to the following sections to install the console specific mounting bracket and
to connect the CAN Switch Box.
Mounting the CAN Switch Box
Envizio Pro XL Bracket (P/N 107-0172-197)
Note: The supplied mounting bracket must be attached to the Envizio Pro XL so
that the CAN Switch Box is mounted below the field computer.
1. Set the mounting bracket over the mounting posts on the back of the field
computer.
2. Set the RAM mounting arm over the mounting plate and secure using the
screws supplied with the field computer.
3. Align the CAN Switch Box with the remaining predrilled holes and secure using
screws supplied with the switch box.
2
techwriting@ravenind.com