Hard Disk Bit Order; Operation And Maintenance Guide - Inspur NF5180M5 Operation And Maintenance Manual

and different capacities: the small capacity comes first and the
large capacity comes second.
C. priority order of hard disk installation with the same model and
capacity: the low rotating speed comes first and the high rotating speed
comes second.

8.6.2 Hard disk bit order

1), 3.5*4 backplane 1: YZBB-00777-101 backplane
_Inspur_5270M5_3.5*4_4*NVMe This backplane supports up to 4
NVME hard drives
A. when there is only NVME hard disk, install it to NVME0, NVME1, NVME2
and NVME3 in sequence
B, when there is a common hard disk (SAS/SATA/SSD) mixed with
NVME hard disk: Ordinary hard disk (SAS/SATA/SSD): installed in the
order of NVME0-NVME3
NVME hard disk: installed in NVME3-NVME0 order
NVME0
2), 3.5*4 backplane 2: YZBB-00760-101 backplane _ inspur _ 5180 M5 _ 3.5
* 4 _ 3 * SAS+1 * nvme
This backplane supports up to 1 NVME hard disk
A, only NVME hard disk or ordinary hard disk (SAS/SATA/SSD):
Ordinary hard disk (SAS/SATA/SSD): installed to SAS0-SAS2 and NVME0 in
sequence
NVME hard disk: only installed in NVME0 location
B, when a common hard disk (SAS/SATA/SSD) and an NVME hard disk are
mixed on the backplane, the common hard disk (SAS/SATA/SSD) is first followed
by the NVME hard disk,and NVME can only be installed at NVME0 position
NVME1
Inspur proprietary and confidential information
Copyright Inspur Electronic Information Industry Co., Ltd.

Operation and Maintenance Guide

NVME2
NF5180M5
NVME3
xxxvi