Inspur NF5180M5 Operation And Maintenance Manual page 16

UID │ RST
4
Button
Network status
5
indicator
Memory fault
6
indicator
Power failure
7
indicator
System overheat
8
indicator
9 Fan fault indicator
System fault
10
indicator
2.5x10 NF5180M5 All indicators on front panel
Table 2.5x10 NF5180M5 function of each indicator lamp on the front panel
Numbering Module name
Power switch
2
button
UID │ RST
3
Button
System fault
4
indicator
Inspur proprietary and confidential information
Copyright Inspur Electronic Information Industry Co., Ltd.
Enable/disable UID, it`s blue or off.
Press 6s long to force the system to restart.
Network connection is normal when the indicator is
solid green or blinking green.
If there is no network connection, indicator will be
off.
* Note：This only indicates the PHY CARD status
Normal not bright
When a fault occurs, it is always bright red.
Red flashes when a warning occurs
Normal not bright
The power supply fails and is always bright red.
The power supply status is abnormal, and red
flashes
Normal not bright
CPU/ Memory Overheated, Always Bright Red
Normal not bright
Unable to read rotation speed, usually bright red
Abnormal reading speed, red blinking
Normal not bright
When a fault occurs, it is always bright red.
Red flashes when a warning occurs
Functional description
In the power-on state, the indicator is green.
In standby mode, indicator is orange
Press 4s long to force shutdown.
Enable/disable UID, it`s blue or off.
Press 6s long to force the system to restart.
Normal not bright
When a fault occurs, it is always bright red.
NF5180M5
Operation and Maintenance Guide
xv