Changing Settings - Access PowerKit Installation And User Manual

Easily change the battery parameters using the following steps.
Step 1: On AssetPro application, navigate to "Configuration"
Step 2: Select the unit you wish to edit and click 'Filter'.
Step 3: Change the Voltage and AH Capacity of the battery.
Step 4: Select 'Alarm' tab and change Over/Low voltage alarm thresholds.
a. Over Voltage = max charge voltage per cell multiplied by the # of cells.
b. Low Voltage = min charge voltage per cell multiplied by the # of cells.
Step 5: Select the "Charging Profile" tab.
6

CHANGING SETTINGS

→
Settings using side bar.
POWERKIT Installation and User Guide