Installation; Installing The Powerkit; Installing The Temperature Sensor - Access PowerKit Installation And User Manual

INSTALLATION

INSTALLING THE POWERKIT

Step 1: Plug connector labeled 'To Battery' on the
PowerKit, to corresponding connector on equipment
leading to the equipment's battery.
Step 2: Plug connector labeled 'To Lift' on the PowerKit,
to corresponding connector leading to the lift.

INSTALLING THE TEMPERATURE SENSOR

PowerKit comes with a temperature sensor that gets
inserted in a battery cell.
Step 1: To install the temperature sensor between
the cells, locate 2 battery cells that have a large gap
between them.
Step 2: Next, insert the temperature sensor at least
5 inches down between the cells.
4 POWERKIT Installation and User Guide