User Guide - Access PowerKit Installation And User Manual

The PowerKit is essentially a CellTrac with added ease of installation and thus the user interactions
remain the same. The CellTrac LEDs indicate current state of the CellTrac.
The following table summarizes their function:
LED Function
Alarm
Low Water
Battery Charging
Battery Discharging
Battery Available
Communication
5

USER GUIDE

Color
Red
Red
Amber
Red
Green
Green
Rate
Steady ON when any alarm is
present except Low Water
Steady ON when low water
alarm is present
Steady ON when charging
Steady ON when Discharging
If battery is conventional:
Steady ON when battery is
ready to be used after cooling
stage is complete, even when it
is discharging. Flashing when
battery is cooling.
If battery is fast charge:
Flashing when not paired and
seeing RSMC's broadcasts
Steady ON when paired with
RSMC
Flashing at a 2-sec rate when
communication is good between
CellTrac and AssetPro Flashing
at a ½ sec rate when
communication is not
established, or it is dropped
between CellTrac and AssetPro.
POWERKIT Installation and User Guide