Advertisement
Available languages
Available languages
GB
Assembly Instructions
Feeder for deer
Komponents:
4 legs
1 feed box
1 lid
Screws
Bag 1:
4 medium long screws f/legs
4 long screws f/legs
Bag 2:
8 short screws for the lid
Position the legs so that the
bottom screw hole is in the
middle of the lower leg. The
upper edge of the legs is
adjusted so that they are in the
center of the feed box.
Use the medium-length
screws to mount the legs in
the upper screw hole.
Make sure that all parts are present before assembly. Do not tighten the screws until you
We reserve the right to change the technical parameters and specifications of this product without prior notice.
P. Lindberg A/S
Tel.: 70212626
Drill with a 3,5 mm drill to
prevent the wood from
breaking when assembled.
When installing the second
set of legs, follow the
previous procedure while
aiming for the first set of
legs.
are sure they are installed correctly.
1
Sdr. Ringvej 1
DK-6600 Vejen
Use the long screws to
mount the legs in the lower
screw hole.
The lid is mounted with the
short screws.
MAN 9062386 EN V1
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk
Advertisement
