Page 2
SECTION GENERAL INFORMATION ASSEMBLY & INSTALLATION INSTRUCTIONS OPERATING INSTRUCTIONS MAINTENANCE TROUBLE SHOOTING GUIDE ASSEMBLIES, PARTS LISTING & EXPLODED VIEW BLAST CABINET SERIAL NUMBER:...
Page 3
1.1.1 All products and equipment designed and attempt is made to move them manufactured by Panblast are intended for use by experienced users of abrasive blasting 1.3.7 Any modification of the equipment and/or equipment and its associated operations and components or use of non-genuine PanBlast™...
Page 4
Figure 1. to the fixed suction pipe. Control panel functions and indicators 2.24 Installation of the air jet and nozzle are the same as the fixed gun assembly. - 2 - ZVP-PC-0069-00-R1...
Page 5
Also check the air volume required for the nozzle at the required blasting pressure against the compressed air supply available. 3.5.2 Use a suitable grade of abrasive to achieve the desired surface finish. - 3 - ZVP-PC-0069-00-R1...
Page 6
1. Fuse 2. Power Switch 3. Light Switch 4. Dust Switch 5. Power Switch 6. Control Indicator 7. Door-Closed Indicator 8. Fixed Gun Indicator 9. Movable Gun Indicator 10. Air Pressure Gauge 11. Air Pressure Valve - 4 - ZVP-PC-0069-00-R1...
Page 7
Replace gloves necessary. Cabinet window 4.5.1 Over a period of time, the cabinet viewing window cover will become frosted by the impact from rebounding abrasive. The window cover - 5 - ZVP-PC-0069-00-R1...
Page 8
Bad contact Have it repaired by a qualified technician The viewing window is not sealed properly Replace the corresponding foam sealing Dust leakage The door is not sealed properly strip The funnel is not sealed properly - 6 - ZVP-PC-0069-00-R1...
Need help?
Do you have a question about the ZVP-PC-0069-00 and is the answer not in the manual?
Questions and answers