Related Manuals for Panblast BB120S-2 CORSA II
Summary of Contents for Panblast BB120S-2 CORSA II
- Page 1 PRODUCT OPERATING MANUAL PANBLAST BB120S-2 CORSA II ERC4-1 AIRSTOP II Manual Number: ZVP-PC-0182-00...
-
Page 2: General Information
SECTION GENERAL INFORMATION INITIAL SETUP INSTRUCTIONS OPERATING INSTRUCTIONS MAINTENANCE TROUBLE SHOOTING GUIDE ASSEMBLIES, PARTS LISTING & EXPLODED VIEW BLAST POT SERIAL NUMBER:... - Page 3 Any modification of the equipment and/or 1.1.1 All products and equipment designed and components or use of non-genuine PanBlast™ manufactured by Panblast are intended for use replacement parts will void warranty. by experienced users of abrasive blasting equipment and its associated operations and 1.3.8...
- Page 4 Panblast recommends the use of pressure. Do not set the blast pressure below correctly sized safety whip check cables to all 586Kpa (85psi) as the blast system may not compressed air and blast hose connections.
- Page 5 3.1.16 If the abrasive feed to the blast nozzle is erratic 1.5mm (1/16") from its original size, or if the and surging, then the feed is too rich and the inner carbide liner is chipped or cracked. abrasive flow needs to be decreased, again in 1/4 turn increments in a clockwise direction 4.2.2 Check the condition of the nozzle washer and...
- Page 6 TROUBLE SHOOTING GUIDE Item Problem Possible Cause Corrective Action Check that air compressor is No / inadequate compressed air operational. Ensure air output and supply supply hose size is correct Main supply ball valve (Figure A. Open ball valve No.2) is closed Bulk blaster will not pressurize Posi seal valve or seating ring worn Inspect &...
- Page 7 ASSEMBLIES, PARTS LISTING & EXPLODED VIEW PanBlast BB120S-2/AU Corsa II ERC4-1 AirStop II Assembly Stock Code Description Dry Weight Abrasive Capacity Piping Size 3398 litres 2500 kg BEP-PE-PB-0001 BB120S-2/AU Corsa II ERC4-1 Airstop II 76 mm(3") (5512 lbs) (120 ft 6.1.1...
- Page 8 6.1.2 PanBlast BB120S-2/AU Corsa II ERC4-1 AirStop II Exploded View ZVP-PC-0182-00-R0 - 6 -...
- Page 9 6.1.3 PanBlast BB120S-2/AU Corsa II ERC4-1 AirStop II Circuit Diagram ZVP-PC-0182-00-R0 - 7 -...
- Page 10 PanBlast Posi Seal Valve Assembly Stock Code Description Weight BAC-BF-0408-00 Double Seal Posi Seal Valve 10.5 kg (23.1 lbs) 6.2.1 PanBlast Posi Seal Valve Parts Listing Item Description Spring Valve Stem Diaphragm Upper Body Lower Body Seat Retainer Ring Valve Plug Spacer Bolt 1/2"...
- Page 11 PanBlast Tandem Valve 32mm (1-1/4") Assembly Stock Code Description Weight BAC-RC-PB-0276 1-1/4" Tandem NPT Valve Assembly 3.75 kg (8.27 lbs) 6.3.1 PanBlast Tandem Valve 32mm (1-1/4") Parts Listing Item Stock Code Description YAC-RC-PB-0280 YAC-BS-PB-0041 O-Ring YAC-RC-PB-0293 Cover YAC-FN-PB-0276 Lock Nut...
- Page 12 6.3.3 PanBlast Tandem Valve 32mm (1-1/4") Exploded View ZVP-PC-0182-00-R0 - 10 -...
- Page 13 PanBlast Corsa II Valve with Tungsten Sleeve Assembly Stock Code Description Weight BAC-VA-PB-0089 Corsa II 1-1/4" With Tungsten Sleeve 6.20 kg (13.64 lbs) 6.4.1 PanBlast Corsa II Valve with Tungsten Sleeve Parts Listing Item Stock Code Description BAC-VA-PB-0093 Top Cover...
- Page 14 6.4.3 PanBlast Corsa II Valve with Tungsten Sleeve Exploded View ZVP-PC-0182-00-R0 - 12 -...
- Page 15 PanBlast II Electric Remote Control Handle Assembly Stock Code Description Weight BAC-RC-0356-02 AirStop II Electric Control Handle 0.52 kg (1.14 lbs) 6.5.1 PanBlast AirStop II Electric Remote Control Handle Parts Listing Item Stock Code Description YAC-RC-PB-0168 Screw YAC-RC-PB-0166 Lever YAC-RC-PB-0170...
- Page 16 6.5.3 PanBlast AirStop II Electric Remote Control Handle Exploded View ZVP-PC-0182-00-R0 - 14 -...
Need help?
Do you have a question about the BB120S-2 CORSA II and is the answer not in the manual?
Questions and answers