Scanning With Captureontouch Lite; Scanning Procedure - Canon imageFORMULA P-150M User Manual

Scanning with CaptureOnTouch Lite

CaptureOnTouch Lite is a scanning application that comes pre-
installed in the scanner. It can be used on a computer that does not
have the scanner driver installed.
You can follow the instructions on the screen to scan a document and
save the scanned images in any file format.

Scanning Procedure

1
Set the Auto Start switch at the rear panel of the scanner
to ON and then connect the scanner to the computer.
Auto Start
OFF ON
USB cable
If necessary, connect the power supply USB cable.
2
Open the feed tray, turn ON the scanner, and then load
the document.
For details, see "Loading a Document" on p.
When you open the feed tray, the power indicator on the scanner
lights and the auto play screen appears.
IMPORTANT
• When scanning with CaptureOnTouch Lite, do not close the
feed tray until you have finished saving image files.
• If you are using Windows XP or Windows 2000 and you set the
Auto Start switch to ON before connecting the scanner to the
computer, a message requesting that you restart your
computer may appear when you turn ON the scanner. You can
continue normal use even if you click [No] and do not restart the
computer.
3
Click [CaptureOnTouch Lite].
CaptureOnTouch Lite starts, and the main screen appears.
Hint
• The auto play screen may not appear in some operating
environments. In such cases, open the [ONTOUCHLITE] drive
in Windows Explorer, for example, and start the application
directly by double-clicking
Depending on your operating system, the drive name may not
be [ONTOUCHLITE]. Open the drive on which
(ONTOUCH.exe) is located, and start the application directly.
31
28.
(ONTOUCH.exe).