Husky HPRO72MWC20BLK Use And Care Manual page 36

□
At the desired height, re-install the outer slides by pushing the rear clip into the back channel support, then pushing
the front clip down into the front support. Repeat this process for the other side. Ensure the slides are properly seated
and level.
□
Fully extend the slides out and gently insert the inner slide brackets of the tray into the outer slides, being careful they
are properly aligned.
□
Once properly inserted, completely close the tray to set the slides in their proper position and lock into the soft close
mechanism.
Step 2
9
Adding Drawer Liner Adhesive Tape
□
Use 4 pcs of Drawer Liner Adhesive Tape (JJ) to help secure the drawer liners in each drawer. The tape helps prevent
shifting of the drawer liner during normal use.
10
Plastic Plugs
□
Insert the Plastic Plugs (HH&II) into the remaining open holes on the side walls of the Side Locker (A) per the diagram
below.
Tray
Step 1
II
HH
13 Please contact 1-888-HD-HUSKY
HH
HUSKYTOOLS.COM
for further assistance.